XGN2-12 BOX-TYPE FIXED AC METAL-ENCLOSED SWITCHGEAR

XGN2-12 BOX-TYPE FIXED AC METAL-ENCLOSED SWITCHGEAR

XGN2-12 box type AC metal enclosed switchgear is a complete set of indoor distribution equipment used for receiving and distributing electrical energy in 3, 6, and 10KV three-phase AC systems. It has functions such as circuit control, protection, and monitoring. Its busbar system consists of single busbar and single busbar with bypass busbar, and can derive a dual busbar structure.

This switchgear meets the requirements of national standards and has a complete set of mechanical anti misoperation locking devices with reliable performance, complete functions, simple structure, and easy operation, which can easily and effectively meet the requirements of the “five prevention” locking functions proposed by the two departments. Switchgear is suitable for power plants, substations, industrial and mining enterprises and institutions and other power distribution places.

XGN2-12 BOX-TYPE FIXED AC METAL-ENCLOSED SWITCHGEAR

LOW LOSS

HIGH ENERGY EFFICIENCY

WIDELY APPLICABLE

SEALED OIL TANK

Applicable Scenarios

  • Environmental temperature upper limit+40 ℃ lower limit -25 ℃ (indoor);
  • Altitude of 1000m;
  • The daily average relative temperature should not exceed 95%, and the monthly average should not exceed 90%;
  • The seismic intensity shall not exceed 8 degrees;
  • A place without fire, explosion hazards, serious pollution, chemical corrosion, and severe vibration.

Core Parameters

ProjectUnitParameters
Rated voltagekV12
Rated frequencyHZ50/60
Rated insulation level

 

1-minute power frequency withstand voltagekV42（disconnector：48）
Lightning impulse withstand voltage75（disconnector：85）
Rated currentA630、1250、1600、2000、2500、3150、4000、5000
Rated short-time withstand current (4s)kA202531.5405063
Rated peak withstand currentkA506380130130160
Rated short circuit breaking currentkA202531.5405063
Rated short-circuit closing current (peak)kA506380130130160
protection gradeThe enclosure is IP4X
External dimensions

(Width x Depth x Height)

≥ 1600A≤ 1250Amm1200×1200×2600
1000×1200×2600

Competitive Comparison

FeatureXGN2-12 BOX-TYPE FIXED AC METAL-ENCLOSED SWITCHGEARConventional Similar Transformer
No-load lossLower (energy-saving series)Higher standard series
Partial dischargeLow partial discharge, high reliabilityStandard level
MaintenanceMaintenance-free, low operational costPeriodic maintenance required
Fire safetyFlame retardant & explosion-proofVaries

Application Areas

transportation

industry

Urban Community

agriculture

Frequently Asked Questions

What is the rated capacity of XGN2-12 BOX-TYPE FIXED AC METAL-ENCLOSED SWITCHGEAR?

The XGN2-12 BOX-TYPE FIXED AC METAL-ENCLOSED SWITCHGEAR is available in a range of rated power options; the exact kVA for your application is listed in the Core Parameters table.

What are the main advantages of XGN2-12 BOX-TYPE FIXED AC METAL-ENCLOSED SWITCHGEAR?

Low loss and high energy efficiency, low partial discharge, high mechanical strength, short-circuit and lightning resistance, flame retardant, maintenance-free and compact footprint.

What are the applicable scenarios for XGN2-12 BOX-TYPE FIXED AC METAL-ENCLOSED SWITCHGEAR?

It is suitable for medium and high voltage power transmission and distribution projects, urban communities, industry, transportation and agriculture, meeting continuous operation under conventional and harsh conditions.

Does XGN2-12 BOX-TYPE FIXED AC METAL-ENCLOSED SWITCHGEAR require special installation?

No oil discharge tank, fire-fighting or backup power facilities are needed, so it can be installed fully close to the power point with low installation cost.

Related Products and Series